
Picture hanging systems are a great way to get your artwork off the floor and on the wall.
Hanging artworks in your house is an easy way to make your home feel more personal. You can display artwork that matches your style or showcase family portraits. Picture hangers come in many different styles and materials. Choose the right one based on what you’re hanging and what kind of wall material it will go on.
A picture frame hanging system is a system that allows you to hang pictures without nails, picture wires or other hardware. It can be used to hang pictures in any room in your house and usually a frame of any size. The average hanging system(s) can also find them in stores that sell frames and other types of artwork.
How to Choose the Best Picture Frame Hanging System for Your Needs
When choosing a picture frame hanging system, there are many factors to consider. The first thing you will want to do is decide the type of frame you would like to hang. The most common types of frames are wood, plastic, and metal picture frames. If you have many frames made with different materials, it might be best for you to purchase a hanging system that can accommodate all types. More importantly, the system you use should hold up to the weight of the heaviest frame: from heavy pictures to small portrait frames.
Next, think about how many pictures need to be hung on the wall in one go. Will your picture frames be hung individually, or will they be hung in pairs or displayed like a gallery wall? This is an important consideration because a single-hanger system may not work in pairs for some frames. So, you will want to find the right mix and all without ruining the picture frame. Also, the type of wall material should be considered to determine the best possible solution.
This article will go over the most common types of picture hanging systems and how they work.

The Expanding Plastic Sleeve
The expanding plastic sleeve has been around for a long time, and there are many variations. These are excellent for picture frames that weigh less than 10 pounds or medium loads of up to 25 pounds. However, the problem with these is that they don’t expand enough to dig into the drywall. That’s why they are best used in plaster and masonry. The anchors are designed to spread or split inside the wall, making them less susceptible to falling out. Under heavier loads, they can fall out causing wall damage.
Using them is only a matter of drilling a hole in the wall and allowing for a snug fit for the sleeve. You will also want to tap it a bit with a hammer until the anchor flange seats well on the surface. Then you can fasten it by screwing it into the sleeve.
Screw-In Anchors for Picture Hanging
It is a top-rated all-purpose drywall anchor. These happen to be an excellent choice for picture frames that weigh less than 10 pounds. However, their metal counterparts can hold slightly more weight than plastic anchors.
Using it requires that you screw the anchor into the wall using a Philips screwdriver or a cordless drill with a Phillips bit. Then drive a #6 or a #8 screw into the anchor hole before hanging the picture frame.

Picture-Frame Hangers with Accompanying Nails
You will want to always have a few of these in different sizes when undertaking a picture frame hanging project. The large versions can be installed using an angled nail which can support up to 20 lbs. Though heavy pictures, around 50 pounds or so, will require a flat-mounted hook with an anchor.
Molly Bolts
The problem with molly bolts is that they aren’t easy to use when paired with other drywall anchors. However, you can still use them to mount a medium-sized frame weighing up to 25 pounds. Though molly bolts can handle heavier weights, we wouldn’t risk it. The good thing is that they are relatively easy to tap into place using a hammer. That said, if you are using a nonpointed version, an installation hole will need to be drilled. That’s why these are bested used in a lath wall or plaster.
Tap-In Expanding Anchors
These are surprisingly easy to use and are great for picture frames of up to 10 pounds. All you need is to tap the pointed end into the wall until the top flange sits flush with the wall’s surface. Then the picture frame can be hung by driving a #6 screw into the flange. It is quick and easy, best suited for small picture frames.

Hollow-Core Door Anchors
Now, these are small molly bolts that will hold light frames, often less than 10 pounds of weight, and can hold up to around 50 pounds if used in hollow-core doors. There are also plastic versions, but those aren’t best suited for heavier picture frames.
Picture Toggle Bolts
The best thing about metal toggle bolts is that they can support heavy loads of up to 50 pounds in plaster, drywall, or hollow-core concrete blocks. The plastic version can bear up to 25 pounds in plaster and drywall. A fan favorite of art galleries these toggle bolts provide sturdy, perfect picture hanging solutions.
Using them is quick and straightforward. Just bore a hole in the wall that’s large enough to accommodate the toggle. Then fit the item, which is anchored over the bolt, insert the toggle and quickly tighten. The remainder of the plastic bolt can also be trimmed.
Conclusion: The Best Way To Hang Pictures On The Wall Is With A Framan Hanger™
Framan Hanger™ is a picture frame hanging system that provides a clean and professional look. It’s easy to install and use; most of all, It’s affordable and can be used for any size of the picture frame.
Made in the USA, it can be temporarily fastened to the center of the frame with an adhesive strip not to move while being permanently attached. It can then be attached with screws perpendicular to the back. The brackets are made from high-strength polymer that does not scratch your walls, ensuring an effortless installation experience.
Installing it is faster and easier than any other system. That’s one of the reasons why it is the picture frame hanger of choice for people who don’t want to damage their walls and yet want perfectly straight hanging pictures.